Wireless Relay

Wireless Relay at a Glance...

  • 1 Relay Installed on a Circuit Board
      - Highly reliable under almost any conditions
  • Onboard 2.4 GHz Wireless Module
      - Reliable 300' Standard Module
      - 1 Mile Upgrade Available
      - Requires 2.4 GHz Modem
      - Modem Mounts as a Virtual COM Port
  • ProXR Lite Versions
      - Not Expandable
  • Industry Leading Command Set
      - Send Specific Commands to Trigger Relays
      - Program in Almost any Language
      - Read 0 to 5 Volt Sensors

Selecting The 2.4 GHz Interface

Wireless RelayBy selecting the 2.4 GHz interface you will be sending commands through a modem connected to the USB port of your computer.  Boards on this page are equipped with a 2.4 GHz communications module that adds wireless communications to the board.

Selecting a Wireless Relay Board

Below you will find the 1-channel Wireless Relay Boards that are available.  The difference being the amperage of the relays installed and the type of relay.  Choose the controller that fits the amperage you are switching.  You will find SPDT relays in the 5, 10 and 20 amp versions and an SPST version in 30 amp.  For more information on selecting the correct relay for your application see Choosing a Proper Amperage.

Selecting a Wireless Relay Series

The 1-Channel boards are available in a non-expandable ProXR Lite version.  ProXR Lite boards have the full ProXR command set, the industry leading command set for controlling relays.  When you find your controller click on the Full Description link to view full specs, watch setup videos, download software and purchase.