Wireless Relay

Wireless Relay at a Glance...

  • 2 Relays Installed on a Circuit Board
      - Highly reliable under almost any conditions
  • Onboard 2.4 GHz Interface Module
      - Requires 2.4 GHz Modem
      - Modem Mounts as a Virtual COM Port
  • Reliable 300' standard module
      - 1 Mile Module Available
  • ProXR Lite Versions
      - Industry Leading Command Set
      - Not Expandable
  • ProXR Versions
      - Industry Leading Command Set
      - Expandable to 256 Relays

Selecting The Wireless Relay Interface

Wireless RelayBy selecting the 2.4 GHz interface you will be sending commands through a modem connected to the USB port of your computer.  Boards on this page are equipped with a 2.4 GHz communications module that adds wireless communications to the board.

Selecting a Wireless Relay Board

Below you will find the 2-channel 2.4 GHz Wireless Relay Boards that are available.  The difference being the amperage of the relays installed and the type of relay.  Choose the controller that fits the amperage you are switching.  You will find SPDT relays in the 5, 10 and 20 amp versions and an SPST version in 30 amp.  For more information on selecting the correct relay for your application see Choosing a Proper Amperage.

Selecting a Wireless Relay Series

The 2-channel 2.4 GHz Relay boards are available in the ProXR Lite and ProXR versions.  Both versions have the same firmware installed and accept the same ProXR command set, the industry leading command set for controlling relays.  The ProXR Lite version is non-expandable, the ProXR version is expandable to 256 relays.  When you find your controller click on the Full Description link to view full specs, watch setup videos, download software and purchase.