Selecting The ZB Mesh Interface
By selecting the ZB Mesh interface you will be sending commands over an existing Mesh Network. We don't recommend first time users learning Mesh Networking with these devices. Users should have an understanding of Mesh Networking, we will not be able to provide Mesh Networking support.
Selecting a ZB Mesh Relay Board
Below you will find all the ZB Mesh Relay control that are available. The difference being the amperage of the relays installed and the type of relay. Choose the controller that fits the amperage you are switching. You will find SPDT relays in the 5, 10 and 20 amp versions and an SPST version in 30 amp. DPDT versions are also available with 1, 3 or 5 amp relays installed. For more information on selecting the correct relay for your application see
Choosing a Proper Amperage>.
Selecting a ZB Mesh Relay Series
The ZB Mesh Relay boards are available in the ProXR Lite and ProXR versions. Both versions have the same firmware installed and accept the same ProXR command set, the industry leading command set for controlling relays. The ProXR lite version is non-expandable, the ProXR version is expandable to 256 relays. When you find your controller click on the Full Description link to view full specs, watch setup videos, download software and purchase.
