Scan Series Contact Closure Boards That Know What Time It Is
Monitor Contact Closure Outputs
Send simple commands to activate relays
Activate up to 16 relay timers
Monitor up to 256 total Contact Closures
Control up to 256 total relays
Our Scan Series is ideal for reading motion detectors, glass breakage detectors, window/door open detectors, light switches, and other kinds of devices with a contact closure output. Our Scan Series Boards allow you to read 16, 32, or 48 switches per Board and can be expanded using multiple ScanSwitch expansion modules that are easily chained together to read up to 256 Contact Closure Inputs per board.
MirX & MirC Boards Control Relays in a Remote Location
Activate Relays in a Remote Location
Contact Closure Inputs on one Board Activate Relays on a Second Board
Up to 8 Relays Available
No Programming Required - Works Right Out of the Box!
MirC controllers allow contact closure inputs to control contact closure outputs in a remote location. The sending device is equipped with contact closure inputs, used to control relays on the remote device.
Each MirX controller is equipped with contact closure inputs and outputs. The inputs on one controller activate the relays on the other controller using wireless or Ethernet communications..
Time Controlled Relays Control Relays with a Time Schedule
Time Activated Relay Boards That Know What Time It Is
Time Activated Relay Controllers a have an integrated battery backed Real Time Clock with memory that allows users to control relays based on a time schedule. Use your computer to setup the time schedule and store into the controller. Once stored, the computer is not required, and will activate relays according to a schedule that can be as simple or as complex as your application requires.
Time Delay Relay Configure Time Relay will Remain Active
Our Reactor Series controllers make a great time delay relay. You can define
up to 8 timers that run in the
background. Each timer can
have a different time assigned to
it. Timers can be triggered or
canceled based on input events.
Relays can be associated with timers so the relays only come on
when the timer is active. Timers support Event Piping. Event
Piping means a timer can trigger another timer or another event
after the timer has completed its cycle.
To break down further look for Shop By Channel on the left navigation and see the computer interfaces available for each channel option.
Shop By Application Boards Design for Specific Tasks
These boards are designed for specific applications. Reactor, Key Fob & don't require a computer during operation. MirC/X don't require a computer at all.
Contact Information
