24 Channel ZigBee Relay Controllers offer Standardized Low-Cost, Wireless 2-Way Communications, Offering Excellent Communication Range and Reliability. ZigBee Relay Controllers allow you to speak to a NCD Device using standard Serial Communication as though the device were directly connected to the COM port of your computer. Serial commands are automatically forwarded to ZigBee devices within range. 24 Channel ZigBee Relay are available with your choice of SPDT or DPDT relays installed.
Summary of ZigBee Communications
A ZigBee Modem mounts as a Virtual COM Port on your PC
Simply write your software to talk to the serial port and you will be talking to a ZigBee Relay in no time!
Supports 2-way communications at any baud rate up to 115.2K
8 Data Bits, 1 Stop Bit, No Parity
ProXR versions expandable to control up to 256 Relays using the XR Expansion Port
Control one relay or all 256 at once with manual or automatic refreshing command set
All ZigBee Controllers are SignalSwitch Compatible
Using our example software and source code there is
little to no programming required. Using our USB Modem the relay acts
like it's connected directly to your computer!
The ease of setup of the ZigBee Relays, which utilize a wireless protocol is demonstrated in the above video. These Wireless Relays are ideal for reliable, low cost wireless relay applications. Not only is it easy to power and connect the wireless interface but thanks to our example software and source code there is little to no programming required to allow your computer to begin communicating with the relay. Simply connect a ZigBee Modem into your USB port and it will forward all commands to the Wireless Relay. (Commands can also be sent to multiple Relays).
24 Channel ZigBee Relay
Our 16 Channel ZigBee Relays feature
SPDT or DPDT Relays installed. Controllers are available with your choice of eight channel 8/10-Bit
Analog to Digital Conversion or
UXP Expansion Port on selected models (look for AD or UXP in the part number) and all are of course
SignalSwitch compatible. All twenty four Channel ZigBee Relays feature the
ProXR Command Set and an
XR Expansion Port. Built from the ground up with expansion in mind, simply Chain the
XR Expansion Modules to the XR Expansion port, one after another, to meet your computer controlled switching requirements up to 256 relays.
ZigBee Modem
A
ZigBee Modem connects to the USB Port of your PC and mounts as a virtual COM port (ZigBee Modems and video can be found on the
ZigBee Modem page). Simply write your software to talk to the serial port and you will be talking to wireless devices in no time!!! ZigBee modem options will be available at checkout.
Articles
New to ZigBee Wireless Relay? Click the following links for helpful wireless articles to get you started.
UXP is a new standardized data port, specifically for the purpose of speaking to various expansion modules. If the controller you are considering is equipped with a UXP port, you can take advantage of extended commands to speak to our growing line of I/O expansion modules. UXP in the part number allows you to:
By downloading the NCD Component Library you will receive over 40 samples from A/D Conversion to Duration and Pulse Timing and best of all it's FREE!! We want the user to be able to experiment with all the different samples available so as of right now the samples cannot be downloaded individually.
We've "Started" the Programming for You
With the NCD Component Library we've "started" the programming for you. We say started because these are fully functioning samples but we've also included the source code so you can customize them to your exact needs. Start by downloading the NCDComponentSetup.zip file from the NCD Component page.
